Bosch IRIS-Net User Manual page 914

IRIS-Net
Element
IP ADDRESS
NETWORK MASK
GATEWAY ADDRESS
MAC ADDRESS
NAME
BUZZER
SYSTEM LANGUAGE
VOICE ALARM STATE
RESET
PRIORITY
AUTO EXIT
DATE/TIME
INTERNAL CLOCK
DCF77 SYNCHRONIZATION
DCF77 SIGNAL STATUS
NETWORK SYNCHRONIZATION
TIME MASTER
ENABLE SLAVE CLOCK
CURRENT SLAVE CLOCK TIME
FIRMWARE
Bosch Security Systems B.V.
Description
Indicates the IP address of the PVA-4CR12's Ethernet port (factory setting:
192.168.1.100). Enter the address of the PVA-4CR12 with which you want to
establish on-line communication.
Indicates the Ethernet port's network mask (factory setting: 255.255.255.0).
Indicates the standard gateway of the Ethernet port (factory setting:
192.168.1.1).
Indicates the MAC address of the connected PVA-4CR12 when on-line. The
MAC address of the PVA-4CR12 is also shown on a label on the unit's rear
panel.
IRIS-Net internal device name of the PVA-4CR12.
Select ON to indicate a connection failure to a call station (selectable via the
drop down field) via the integrated buzzer of the PVA-4CR12.
Select the system language of the PAVIRO system. Please note to update the
call station firmware when selecting Korean or Chinese.
This indicator shows "ACTIVE" if the device is in voice alarm state, else "NOT
ACTIVE".
Press the RESET button to deactivate the voice alarm state.
Select the priority (70–100) of the voice alarm. Select OFF to disable the
voice alarm handling of the device.
Select this checkbox if the voice alarm state should be stopped automatically
after the alarm signal is stopped/muted (e.g. no alarm request present).
Date and time of the PVA-4CR12 system clock.
Opens the system clock settings dialog box.
Select this option to synchronize the internal clock of the PVA-4CR12 with
the DCF77 signal. Please refer to the manual how to connect an external
DCF77 receiver.
Indicates the DCF77 signal strength:
– Green: Signal strength OK
– Red: Signal strength not OK
Select this option to synchronize the internal clock of this PVA-4CR12 with
the internal clock of another PVA-4CR12 connected via Ethernet.
Select the PVA-4CR12 (connected via Ethernet) to synchronize the internal
clock with. This drop down can only be used if the NETWORK
SYNCHRONIZATION option is selected.
Select this checkbox if slave clocks are connected to the PVA-4CR12.
Set the time for the slave clocks.
Indicates the firmware version of the PVA-4CR12 when on-line.
User Manual
PAVIRO | en 914
2017.05 | 3.20 | F.01U.119.956