Bosch IRIS-Net User Manual page 950

IRIS-Net
Element
POWER ON/OFF SIGNAL
EXTERNAL ON/STANDBY
POWER SUPPLY STATUS
MAINS POWER
BATTERY POWER
CHARGER STATUS
BATTERY 90%
PERIPHERAL DEVICE STATUS Set the checkbox to monitor the status of peripheral devices..
COMBINED POWER STATE
SYSTEM OPERATION MODE
& CST TEXT
Bosch Security Systems B.V.
Description
Select the GPO contact or the virtual TE value for signaling the
controllers' operating mode. In standby mode the GPO is open.
Select the digital GPI or virtual TE value to be used for switching to
standby mode.
Select the digital GPI or virtual TE value that is used for signaling
„mains power OK". Set the checkbox to monitor this status.
Select the digital GPI or virtual TE value that is used for signaling
„battery power OK". Set the checkbox to monitor this status.
Select the digital GPI or virtual TE value that is used for signaling
„charger status OK". Set the checkbox to monitor this status.
Select the digital GPI or virtual TE value that is used for signaling
„battery status at least 90%". Set the checkbox to monitor this status.
This LED is green, if all selected power supply status are OK.
User Manual
PAVIRO | en 950
2017.05 | 3.20 | F.01U.119.956