Bosch IRIS-Net User Manual page 881

IRIS-Net
STANDBYLED
The Standby LED of the PMX-4CR12 lights, when the device is in standby mode. The corresponding property
"PMXCON_1.System.Info.StandbyLED" can be used to query the current mode.
Value
0
1
AudioNet Dialog
The AudioNet dialog allows the configuration and supervision of an audio network, consisting of two or more
PMX-4CR12 controllers connected via an OM-1 module. The AudioNet tab will only be displayed when more than 1
controller is added in the network. With AudioNet it is possible to transmit audio signals from one PM6K controller to
another.
One controller needs to be configured as AudioNet master. PMXCON_1 will be the master by default. All other
PMX-4CR12 controllers within the project are automatically configured as AudioNet slave. Both OM-1 interface (audio)
and Ethernet (control data) are required for setting up an AudioNet. Upon failure of the primary interface, the
secondary interface will be activated automatically. In case of failure of the Ethernet, AudioNet Redundancy is enabled.
This function allows transmitting a signal in a predefined zone pattern to all PMX-4CR12 controllers, if the function is
activated and a Destination is defined.
Bosch Security Systems B.V.
Description
PMX-4CR12 is in operating mode
PMX-4CR12 is in standby mode
User Manual
PROMATRIX 6000 | en 881
2017.05 | 3.20 | F.01U.119.956