Bosch IRIS-Net User Manual page 223

IRIS-Net
/ /IN1
CONTRO
L
/IN2
/OUT1
Bosch Security Systems B.V.
/
PROTE
CT
/STATE
/ON /TIME
/FNCT
/PRM /...
/OFF ...
...
/STATE
/ON /TIME
/FNCT
/INV
R / W ON, OFF,
"new Pass-
word"
R ON, OFF
R / W 0...10.0 [s]
R / W NOTHING,
POWER,
ABS, REL,
TOG- GLE,
PRESET,
MONI,
MEMFLAG,
MEAS,
TEST- GEN
R / W ON, OFF
R / W 0...10.0 [s]
R / W NOTHING,
POWER,
ABS, TEMP,
VU, CTL_IN,
ERR- FLAG,
MEMFLAG,
PRESET
R / W ON, OFF
User Manual
REMOTE AMPLIFIER | en
Read if an owner password is already
defined (ON, OFF). Write "new
Password" to define a new password
(up to 16 characters). Writing is only
possible if /PRE- SET/OWNER/
PASSWORD is "OK".
Commands for Control Inputs/Control
Outputs
State of the control input
Delay / debounce time during activation
Function during activation.
For further details please refer to the
table "Control Inputs - GPI Functions"
below.
Parameter and values for the functions
mentioned before
(same as above but for the deactivation
of control inputs)
(same as above but for the control input
2)
State of the Control Output
Delay / debounce time for the
programmed condition
Condition that activates a control
output.
For further details please refer to the
table "Control Outputs - GPO Functions"
on this page.
Inverts the result of the programmed
condition
2017.05 | 3.20 | F.01U.119.956
223