Bosch IRIS-Net User Manual page 236

IRIS-Net
../PRM/VALUE
TEMP
../PRM/
CELSIUS
VU
../PRM/SEL
../PRM/CHAN
../PRM/DB
CTL_IN
../PRM/IDX
ERRFLAG
../PRM/
DEVICE
../PRM/IN_A
../PRM/IN_B
../PRM/OUT_A
../PRM/OUT_B
MEMFLA
G
../PRM/MASK
../PRM/VALUE
PRESET
../PRM/DIRTY
../PRM/USER
Bosch Security Systems B.V.
Reference value for comparison
Interpretation results in "true", when the measured amplifier
temperature is higher or equals the reference value.
-20...150 Temperature reference value
[°C]
Interpretation results in "true", if any of the selected VU in any
of the selected channels is higher or equals the programmed
reference value.
NONE, IN, Any combination of the values listed is possible. LIM = Limiter
OUT, CMP = compressor
CMP, LIM
A / B / Selects channel A, or channel B, or channel A and B
A,B
[dB] VU reference value
Interpretation results in "true", when the selected control
input is activated.
1, 2 Selects a control input
Interpretation results in "true", when one of the selected flags
is set. Any combination of the flags listed is possible.
Mask for device state/error flags
Mask for input channel A state/error flags
Mask for input channel B state/error flags
Mask for output channel A state/error flags
Mask for output channel B state/error flags
Interpretation results in "true", when the actual state of the
selected memo flags resembles the reference pattern.
NONE, Selects memo flags to be interpreted (listing)
1...16
NONE, Defines the expected reference pattern for memo flags
1...16
Interpretation results in "true", when the actual preset is
identical to a selected preset.
ON, OFF Selection is also valid, when parameters have been changed
(dirty)
NONE, List of selected user presets
1...6
User Manual
REMOTE AMPLIFIER | en
2017.05 | 3.20 | F.01U.119.956
236