Rcm26Remoteampsui - Bosch IRIS-Net User Manual

IRIS-Net
First, you have to select the desired RACE file by use of the Browse... button. Because a RACE file can hold the data of
up to 31 EV Dx38, you need to continue by selecting the desired device from the RACE file within the dialog SELECT
DEVICE FROM RACE FILE. At the end you have to specify which of the four Dx38 output channels should be assigned to
the corresponding amplifier channels. Clicking onto OK button completes the process.
Caution!
The loaded RACE file becomes instantly audible when in on-line mode. Be sure to select the
!
desired file with the correct set of parameters. In the worst case, this could lead to severe
damage to the connected loudspeaker cabinets due to improper signal processing!
Consequences
The Speaker Dialog offers the possibility to load the datasets of different loudspeaker systems, assign it to the
amplifier channels and display the acoustic results of this virtual combination. The speaker system datasets, which are
provided as "speaker files" (*.spk), contain factory-measured frequency- and phase responses of all common Electro-
Voice and DYNACORD loudspeaker systems. Some examples are provided in the IRIS-Net directory Speaker Files.
The speaker data as well as any settings made in this window have no direct influence on the transfer function of the
amps. Nevertheless, they provide the user with the possibility for creating loudspeaker systems presets of a higher
quality. Overlaying the measured frequency- and phase responses in the equalizer and crossover windows enables the
user to customize the filter parameters.
Clicking on the Speaker tab in the DSPUI window opens the Speaker page.

RCM26RemoteAmpsUI

The "RCM26RemoteAmpsUI" control panel is the equivalent of the Setup & Control Window of the Remote Amplifiers
with installed RCM-26 module.
The control panel is accessed via a Push Button or a Group and is used for the synchronized control of various
amplifiers. The Remote Amplifiers to be controlled have to be linked to the Push Button or the Group via the menu item
"Administrate Connection" of the corresponding contextual menu.
Tab Description
Config & Info This page provides information about the amplifier and allows making several basic settings as well
as programming control functions.
Bosch Security Systems B.V. User Manual
IRIS-Net | en 92
2017.05 | 3.20 | F.01U.119.956