Sony MVS-8000X User Manual page 155

the CCP-6224/6324, buses may be assigned with the cross-point button rows
for keys 1 and 2 as the auxiliary bus control block.
For example, if you make the setting for one cross-point button in a switcher
bank, this inhibits operation of all cross-point buttons with the same number in
the following buses.
The corresponding name also disappears from the source name display.
• Background A, background B
• Keys 1 to 8
• Utility 1, Utility 2
• DME utility 1, DME utility 2
• External DME
To inhibit operation of a cross-point button
Hold down the button which "Inhibit Set" is assigned, and press the cross-point
button whose operation you want to inhibit.
The button you pressed flashes amber, and this makes the operation inhibited.
Notes
Even when you inhibit operation of a cross-point button, macro attachment
settings are still possible (see "Setting and Canceling a Macro Attachment" in
Chapter 16 (Volume 2)).
To clear a cross-point button operation inhibit setting
Hold down the button to which "Inhibit Set" is assigned, and press the button
whose operation is inhibited (flashing amber).
This clears the operation inhibit setting for the button you pressed.
To clear all operation inhibit settings
Press the button to which "Inhibit Set" is assigned and the button to which
"Inhibit All Clear" is assigned simultaneously.
Selection of signals linked with the audio mixer
When you select a signal in a switcher bank background A, key 1 or key 2 row
(of the CCP-6224/6324 control panel in AUX control mode) or AUX bus
control block (of the CCP-8000), and the bank and signal are set to be linked
to the audio mixer, then the program output of the audio mixer follows the
signal selection.
For details of the setting, see "Cross-Point Settings (Xpt Assign menu)" in
Chapter 19 (Volume 3).
155
Signal Selection