Sony MVS-8000X User Manual page 180

4
5
6
Setting the transition rate by a menu operation
1
2
3
Displaying the transition rates in a menu and changing the
settings
For each of the M/E and PGM/PST banks, you can display the transition rate,
independent key transition rate and fade-to-black transition rate, and change
the settings.
180
Executing a Transition
Press the [TRANS] button.
You can now set the M/E-1 block background transition rate.
Watching the alphanumeric display, enter the transition rate you want to
set with the memory recall section button.
If required, press the [TC] button to switch the input mode (frame count
input or timecode input).
• Enter a value of up to three digits.
• To cancel the input, press any of the mode selection buttons.
Press the [ENTR] button.
In the switcher bank, select first VF7 'Misc,' then HF1 'Transition.'
The Transition menu appears.
Select any transition type in the <Transition Type> group.
Turn the knob to set the transition rate.
Knob Parameter
1 Transition Rate
Adjustment Setting values
Transition Rate 0 to 999 (frame count)