Procedure For Basic Transition Operation - Sony MVS-8000X User Manual

Procedure for Basic Transition Operation

The positions of the principal buttons used for basic transition operation are as
follows.
1
2
160
Procedure for Basic Transition Operation
Next transition
selection buttons
Transition type
selection buttons
Transition execution
section
Transition control block (for standard transitions)
In the cross-point control block, select the background video with the
background A row of cross-point buttons.
Select the way in which the transition will affect the image, using the next
transition selection buttons in the transition control block.
For an overview, see "Selecting the Next Transition" (page 157).
To change the background: Press the [BKGD] button, turning it on.
To insert or delete a key: Press one of the [KEY1] to [KEY4] buttons (or
[DSK1] to [DSK4] buttons in the PGM/PST bank), turning it on.
(For details of the operation to select [Key5] to [Key8], see
"Assigning Buttons for Selection of Keys 5 to 8 in the Setup Menu"
(page 544) in Appendix (Volume 1).
To enable the key priority setting, which determines the key overlay
order after the transition: Press the [KEY PRIOR] button, turning it
on.
You can press more than one button at the same time.
To change the keys and background presets in Setup menus
simultaneously: Press the [ALL] button.
ON ON ON ON
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
BKGD KEY1 KEY2 KEY3 KEY4
KEY SUPER
MIX NAM
PRIOR MIX
PST
ALL COLOR WIPE DME
MIX
PRIOR NORM TRANS
NORM REV
SET /REV PVW
AUTO
CUT
TRANS
PTN LIMIT
KF
LIMIT SET