Table of Contents
Advertisement
N9010/20/30AK-REA
Servicing
WARNING
These servicing instructions are for use by qualified personnel only. To
avoid electrical shock, do not perform any servicing unless you are
qualified to do so.
WARNING
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended. Discard used batteries according to
manufacturer's instructions.
WARNING
For continued protection against fire hazard replace line fuse only with
same type and rating. The use of other fuses or material is prohibited.
WARNING
These servicing instructions are for use by qualified personnel only. To
avoid electrical shock, do not perform any servicing unless you are
qualified to do so.
WARNING
The opening of covers or removal of parts is likely to expose the user to
dangerous voltages. Disconnect the instrument from all voltage sources
before opening.
WARNING
No operator serviceable parts inside. Refer servicing to qualified personnel.
To prevent electrical shock, do not remove covers.
WARNING
The detachable power cord is the instrument disconnecting device. It
disconnects the mains circuits from the mains supply before other parts of
the instrument. The front panel switch is only a standby switch and is not a
LINE switch (disconnecting device).
Connector Care and Cleaning Precautions
Remove the power cord to the instrument. To clean the connectors use alcohol in a well
ventilated area. Allow all residual alcohol moisture to evaporate, and fumes to dissipate
prior to energizing the instrument.
To prevent electrical shock, disconnect the
WARNING
N9010/20/30AK-REA
a dry cloth or one slightly dampened with water to clean the external
case parts. Do not attempt to clean internally.
WARNING
If flammable cleaning materials are used, the material shall not be stored,
or left open in the area of the equipment. Adequate ventilation shall be
assured to prevent the combustion of fumes, or vapors.
8
from mains electrical supply before cleaning. Use
Safety and Regulatory Information
Agilent Technologies
N9030-90019
Advertisement
Table of Contents
