Ascii Data Formats - Agilent Technologies 8719ES User Manual

If you select
DATA ARRAY ON
is stored to disk in IEEE-64 bit real format (for LIF disks), and 32 bit PC format for
DOS disks. This makes the DOS data files half the size of the LIF files.
NOTE Selecting
data format. See
GRAPHICS ON
If you select
GRAPHICS ON
programmer's guide for information on using display graphics.) The measurement
display is not saved with this selection. (Refer to
Results to a Disk Drive" on page 4-13
DATA ONLY ON
If
DATA ONLY ON
instrument state is not saved, and therefore, cannot be recalled.
6. Choose the type of format you want:
Choose
SAVE USING BINARY
applications.
Choose
SAVE USING ASCII
want to import the information into a spread sheet using comma-separated values
(CSV) format.
7. Press
RETURN

ASCII Data Formats

CITIfile
CITIfile (Common Instrumentation Transfer and Interchange file) is an ASCII data format
that is useful when exchanging data between different computers and instruments.
CITIfiles are always saved when the ASCII format has been selected as shown:
Save/Recall
DEFINE DISK-SAVE
Select one of the following choices:
—
DATA ARRAY ON
—
DATA ONLY ON
—
RAW ARRAY ON
—
FORMAT ARY ON
SAVE USING ASCII
RETURN
SAVE STATE
,
RAW ARRAY ON
DATA ARRAY ON
"ASCII Data Formats" on page
, the user graphics area is saved. (Refer to the
data array is saved along with any other selected array, the
for all applications except CITIfile, S2P, or CAE
for CITIfile, S2P, and CAE applications or when you
.
SAVE STATE
Printing, Plotting, and Saving Measurement Results
, or
FORMAT ARY ON
may also store data to disk in the S2P ASCII
4-41.
"If You Are Plotting Measurement
to plot measurement displays to disk.)
Saving Measurement Results
, the data
4- 41