Power Off, Remote (Oracle Ilom Cli) - Oracle Sun Server X4-4 Service Manual

Power Off, Remote (Oracle ILOM CLI)

Power Off, Remote (Oracle ILOM CLI)

You can use the Oracle ILOM SP command-line interface (CLI) to remotely power off the
server to standby power mode.
"Power Modes, Shutdowns, and Resets" on page 103
Before You Begin
1. Open an SSH session and log in to the SP Oracle ILOM CLI.
Log in as a user with root or administrator privileges. For example:
ssh root@
where ipadress is the IP address of the server SP.
For more information, see
The Oracle ILOM CLI prompt appears:
100 Sun Server X4-4 Service Manual • October 2015
ipadress
Oracle X4 Series Servers Administration Guide .