Connecting To Z-Tio, Z-Dio, Z-Ct - Mitsubishi Electric GOT2000 Series Connection Manual


Unit address settings
Set the unit address using the unit address setting
switch.
Unit address setting switch
Setting range: 0 to F
9. CONNECTION TO RKC TEMPERATURE CONTROLLER
9.5.3 Connecting to Z-TIO, Z-DIO,
Z-CT
(1) Communication settings
Make the communication settings of the temperature
controller.
Item
*1
9600bps, 19200bps, 38400bps
Communication speed
Communication protocol MODBUS
Data bit : 8bits, Parity : None
Data bit : 8bits, Parity : Even
Data bit configuration
Data bit : 8bits, Parity : Odd
Stop bit : 1bit (fixed)
*2
0 to F
Unit address
Interval time 0 to 250ms
*1 Adjust the settings with GOT settings.
*2 Select the module address without overlapping with that of
other units.
(2) Setting DIP switches
Make the settings of transmission speed, data bit
configuration, communication protocol
Front side Right side
Setting item Set value
9600bps
Communication
19200bps
speed
38400bps
Data bit: 8bits,
Parity: None
Data bit Data bit: 8bits,
configuration Parity: Even
Data bit: 8bits,
Parity: Odd
Communication
MODBUS
protocol
9.5 Temperature Controller Side Setting
Setting range
Dip switch
OFF ON
Switch position
1 2 3 4 5 6
ON OFF
OFF ON
ON ON
OFF OFF ON
OFF ON ON
ON ON ON
ON
9 - 43
9