Connecting To Z-Tio, Z-Dio, Z-Ct - Mitsubishi Electric GOT2000 Series Connection Manual

9.5.3

Connecting to Z-TIO, Z-DIO, Z-CT

■1. Communication settings
Make the communication settings of the temperature controller.
Item
*1
Communication speed
Communication protocol
Data bit configuration
*2
Unit address
Interval time
*1 Adjust the settings with GOT settings.
*2 Select the module address without overlapping with that of other units.
■2. Setting DIP switches
Make the settings of transmission speed, data bit configuration, communication protocol
Setting item
Communication speed
Data bit configuration
Communication protocol
9600bps, 19200bps, 38400bps
MODBUS
Data bit : 8bits, Parity : None
Data bit : 8bits, Parity : Even
Data bit : 8bits, Parity : Odd
Stop bit : 1bit (fixed)
0 to F
0 to 250ms
Front side Right side
Set value
9600bps
19200bps
38400bps
Data bit: 8bits,
Parity: None
Data bit: 8bits,
Parity: Even
Data bit: 8bits,
Parity: Odd
MODBUS
Setting range
Dip switch
OFF ON
Switch position
1 2 3
ON OFF
OFF ON
ON ON
OFF
OFF
ON
9.5 Temperature Controller Side Setting
4 5 6
OFF ON
ON ON
ON ON
ON
9 - 55
9