Setting Maps2 Function (4 Color) - MIMAKI UJV500-160 Operation Manual

Setting MAPS2 Function (4 color)

1
Press the
2
Press the
3
Press
4
Press the
5
Press
• Set Value：MAPS1, MAPS2, OFF
6
Press the
• If you selected OFF in step 5, proceed to step 12.
7
Press
• AUTO : Set the print pattern and smoothing level to the
recommended value automatically depending on
printing mode.
• MANUAL : You can adjust the set value.
• If feeding stripes and color change is not improved by "AUTO" setting, please adjust the
print pattern and smoothing level by "MANUAL" setting.
8
Press the
• When selecting the "AUTO" in the Step 7, proceed to the step 12.
• When selecting the "MANUAL" in the Step 7, proceed to the step 9.
9
Press
• Set value：Pattern1 to Pattern 5
• MAPS2 effect differs depending on image to be printed. Change the printing pattern and
use it after checking effect in advance.
10
Press the
Perform setting to reduce stripes between passes
key in LOCAL.
key.
to select [MAPS].
key.
to select MAPS2.
key.
to select "AUTO" or "MANUAL".
key.
to select pattern to print.
key.
F UNC T I ON
S E T UP [ EN T ]
S E T UP
F E ED COMP . [ EN T ]
S E T UP
MA PS [ EN T ]
MA PS
: OF F
MA PS
: MAP S 2
MA PS 2
: AU TO
MA PS 2
: AU TO
MA PS 2
P A T T ERN : 1
MA PS 2
P A T T ERN : 2
MA PS 2
SMOOT H I NG L V . : AU TO
3-11
1
1
3
5
6