Cisco Asr 9000 Series Aggregation Services Router Vpn And Ethernet Services Command Reference, Release - Cisco ASR 9000 Series Reference Manual

Ethernet Interfaces Commands
Only one encapsulation statement can be applied to a subinterface. Encapsulation statements cannot be applied
to main interfaces.
A single encapsulation dot1q statement specifies matching for frames with a single VLAN ID; a range of
VLAN IDs; or a single VLAN ID or untagged.
Examples The following example shows how to map 802.1Q frames ingress on an interface to the appropriate service
instance:
RP/0/RSP0/CPU0:router(config-if)# encapsulation dot1q 10
Related Commands
Command
encapsulation default, on page 4
encapsulation dot1ad dot1q, on page 6
encapsulation dot1q second-dot1q, on
page 10
encapsulation untagged, on page 12

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

Description
Configure the default service instance on a port.
Defines the matching criteria to be used in order to map
single-tagged 802.1ad frames ingress on an interface to the
appropriate service instance.
Defines the matching criteria to map Q-in-Q ingress frames on an
interface to the appropriate service instance.
Defines the matching criteria to map untagged ingress Ethernet
frames on an interface to the appropriate service instance.
encapsulation dot1q
6.1.x
9