Trunk Status Display Commands
show lacp
same value as the port admin key
the interfaces that joined the group. Note that when the LAG is no longer used,
the port channel admin key is reset to 0.
Example
Console(config)#interface port-channel 1
Console(config-if)#lacp admin-key 3
Console(config-if)#
This command displays LACP information.
Syntax
show lacp [port-channel] {counters | internal | neighbors | sys-id}
port-channel - Local identifier for a link aggregation group. (Range: 1-8)
counters - Statistics for LACP protocol messages.
internal - Configuration settings and operational state for local side.
neighbors - Configuration settings and operational state for remote side.
sys-id - Summary of system priority and MAC address for all channel
groups.
Default Setting
Port Channel: all
Command Mode
Privileged Exec
Example
Console#show lacp 1 counters
Port Channel: 1
-------------------------------------------------------------------------
Eth 1/ 2
-------------------------------------------------------------------------
LACPDUs Sent
LACPDUs Received
Marker Sent
Marker Received
LACPDUs Unknown Pkts : 0
LACPDUs Illegal Pkts : 0
. .
.
Chapter 11
(lacp admin key
: 12
: 6
: 0
: 0
– 371 –
| Link Aggregation Commands
Trunk Status Display Commands
- Ethernet Interface) used by