Trunk Status Display Commands
show lacp
This command displays LACP information.
Syntax
show lacp [port-channel] {counters | internal | neighbors | sys-id}
port-channel - Local identifier for a link aggregation group. (Range: 1-16/27)
counters - Statistics for LACP protocol messages.
internal - Configuration settings and operational state for local side.
neighbors - Configuration settings and operational state for remote side.
sysid - Summary of system priority and MAC address for all channel groups.
Default Setting
Port Channel: all
Command Mode
Privileged Exec
Example
Console#show lacp 1 counters
Port Channel : 1
------------------------------------------------------------
Member Port
LACPDU Sent
LACPDU Received
MarkerPDU Sent
MarkerPDU Received
MarkerResponsePDU Sent
MarkerResponsePDU Received : 0
Unknown Packet Received
Illegal Packet Received
LACPDUs Sent
LACPDUs Received
Marker Sent
Marker Received
LACPDUs Unknown Pkts : 0
LACPDUs Illegal Pkts : 0
. .
.
Table 73: show lacp counters - display description
Field
Description
Port Channel
Local identifier for a link aggregation group.
Member Port
The ports active in this link aggregation group.
LACPDU Sent
Number of valid LACPDUs transmitted from this channel group.
LACPDU Received
Number of valid LACPDUs received on this channel group.
Marker Sent
Number of valid Marker PDUs transmitted from this channel group.
Chapter 11
: Eth 1/1
: 63
: 62
: 0
: 0
: 0
: 0
: 0
: 12
: 6
: 0
: 0
– 399 –
| Link Aggregation Commands
Trunk Status Display Commands