Binding Margin - Riso 9630R User Manual

Chapter 1 Copying
The text is printed at the bottom (within approx. 5 mm
(7/32") of the edge) or top (within approx. 5 mm (7/32") of
the edge) of the sheet.
Standard paper, Non-
standard paper specified
in [Paper Selection]
1
Touch [Separation].
The [Separation] screen is displayed.
2
Select the position where slip sheets
are to be inserted.
3
Touch the paper tray.
The [Select Tray] screen is displayed.
4
Select the paper tray for slip sheets
and touch [OK].
5
Configure [Number Printing].
6
Touch [OK].
• If you are using the optional face down finisher,
high capacity stacker, or multifunction finisher,
you can configure [Offset Output]. For more
information, see the following:
- When using the face down finisher
(p. 8-6 "Offset Output ([Separation])")
- When using the high capacity stacker
(p. 8-24 "Offset Output ([Separation])")
- When using the multifunction finisher
(p. 8-37 "Offset Output ([Separation])")
1-28
Output
orientation
or
Non-standard paper
not registered in this
machine

Binding Margin

Specify the binding margin.
• You cannot use the [Binding Margin] function
with the [Mixed Size Original], [Booklet], or
[Page Border] function. (p. 1-13 "Mixed Size
Original", p. 1-16 "Booklet", p. 1-19 "Page
Border")
[Binding Edge]
Specify the binding edge.
Width
Enter the width using [ ], [
[Auto Reduction]
When this is set to [ON], the image will be automatically
reduced to fit on the paper in order to prevent the edges
from not being printed even when a binding margin is
configured.
1
Touch [Binding Margin].
The [Binding Margin] screen is displayed.
2
Specify the binding margin.
• Select [Binding Edge].
• Use [ ], [ ], or the numeric keys to enter the
width.
• Turn [Auto Reduction] to [ON] in order to prevent
the edges from not being printed even when a
binding margin is configured.
3
Touch [OK].
ComColor GD Series User's Guide
], or the numeric keys.