Riso 9630R User Manual page 169

■ Precautions Regarding Barcode Area
Definition
If the position information of the specified barcode area
changes, such as when an image is rotated, the barcode
area will not be processed correctly.
If the image is rotated or the print direction is changed,
use the creation tool to specify the barcode area again.
(Correct the barcode area starting from the base point.)
Base
point
Example of when
barcode processing is
performed correctly
Base
point
Example of when barcode
processing is not performed
correctly, because the original is
rotated and the position of the
barcode relative to the base point
is changed
●
4 Save the barcode area
definition file.
Click in the menu bar. The barcode area
definition file is output (saved) in CSV format.
To change the file name when saving, select [Save
As] in the [File] menu.
Creating and Registering a Barcode Area Definition File
• The CSV file specifies the size (W, H) and
position coordinates (X, Y) of the barcode on a
printout (in 0.1 mm (0.004") units) relative to the
base point, which is the top left corner of the
original data created on a computer.
Base point
Request for Toner
Collection
y
●
5 Register the barcode area
definition file.
Register the barcode area definition file to the
printer in the administrator menu on the RISO
Console. For more information, see the
"Administrator's Guide".
x
H
W
RISO KAGAKU CORPORATION
ComColor GD Series User's Guide
7
7-7