Cutting The Top Margin Of The Original And Printing [Top Margin] - Riso MZ790U Instruction Manual

Functions for Master-Making
Cutting the Top Margin of the Original and
Printing
You can cut the top portion of the margin to between 0 to 3.9" (99 mm) and make a master.
This feature enables you to skip the registration marks
of these marks.
* About the Registration Mark
In the field of commercial printing, it is normal to print on paper that is larger than the finished size and then cut down
to the finished size afterwards. The symbol that indicates the position to cut in this event is known as the registration
mark.
Important!:
• When you are setting the "Size", magnify/reduce using the area that skips the set value.
Do not use "Auto".
Note:
• This function cannot be used with "2 Up".
Cylinder (Drum) 1 is used for the "Top Margin" when 2-Color printing. You can set Cylinder (Drum) 2 to be used for
individual originals. Multiple settings are available depending upon the cylinder's (drum's) ink color and print aim. For
example, you can set both originals or just one original.
1
Place an original and load paper.
Place the original face down on the Stage Glass.
Align center on the top edge, and close Stage
Cover.
Important!:
• An ADF unit (option) cannot be used with "Top
Margin".
104

Cutting the Top Margin of the Original and Printing [Top Margin]

[Top Margin]
* on the original and print on the finish-sized paper without any
2
Touch [Functions] on the Master
Making Basic Screen.
3
Touch [Top Margin].