Riso 9630R User Manual page 35

4
Adjust the paper guides so that they
are suitable for the paper size.
Move the guides against the edges of the paper, and
push the lever to lock.
• The machine detects the paper size at the
guide position. Be sure to move the guides
against the edge of the paper.
5
Adjust the paper feed pressure
adjustment lever.
For general use, set to "
envelopes, drawing paper, postcards, and similar
products, set to " (CARD)".
6
On the operation panel, check the
tray settings.
When you have switched to a different type or size of
paper, update the feed tray settings. (p. 1-8 "Paper
Selection")
(NORMAL)". For
Adding or Switching the Paper
in the Standard Tray
Press the standard tray descent button when
loading additional sheets or when switching paper.
Note that the standard tray is automatically lowered
when all paper is removed.
1
Press the standard tray descent
button to lower the standard tray.
Hold the button down until the tray reaches the
desired position.
2
Load additional paper, or switch the
loaded paper.
ComColor GD Series User's Guide
Preparation
33