Page Border - Riso 9630R User Manual

Configure the Text Stamp
1
Touch [Stamp].
The [Stamp] screen is displayed.
2
Touch [Text].
3
Configure the print position.
• You cannot print different types of stamps
in the same position. If the arrow for
configuring the print position is grayed out
and cannot be selected, select another
position.
4
Specify the text size.
Touch [ ] or [ ] to specify the size. You can also
touch the text box for [Text Size] and enter a size by
using the number pad.
5
Set the transparency option.
6
Set the apply page option.
7
Configure the text to be printed.
8
Touch [OK].

Page Border

This option adds a border line in the margins of the
paper.
• Even when this option is used with [Combine] or
[Image Repeat], the border line is printed on
each copy paper, not per page of the original.
• The border lines are printed over the original
data. If there is an overlap of an image in the
border printing area, part of the image may not
be printed.
• When [Color Mode] is set to [Black], [Cyan], or
[Magenta], colors that are not selectable are
grayed out. (p. 1-7 "Color Mode")
• Printing a border on black-and-white copies can
make posters and signs stand out.
• You cannot use [Page Border] with [Mixed Size
Original], [Booklet], [Stamp], or [Add Cover] at
the same time. (p. 1-13 "Mixed Size Original",
p. 1-16 "Booklet", p. 1-17 "Stamp", p. 1-27 "Add
Cover")
[OFF], [Red], [Blue], [Green], [Yellow], [Black]
Thickness of the border line (manual entry)
1
Touch [Page Border].
The [Page Border] screen is displayed.
2
Select a border line color.
3
Touch [ ] or [
thickness of the border line.
You can also enter the number using the numeric
keys.
4
Touch [OK].
ComColor GD Series User's Guide
Copy Settings
] to specify the
1
1-19