Printer Driver Settings; Copy Mode Settings - Riso 9630R User Manual

Chapter 8 Optional Equipment

Printer Driver Settings

Output Tray
Specify the output tray for printouts.
When [Auto] is specified, printouts are output to the
appropriate tray automatically based on the
configured functions. To output printouts to the
stacking tray, select [Auto-control Stacking Tray] or
[Wide Stacking Tray].
Click [Details] to display the [Output Tray] dialog box.
Specify whether to stack the pages face up or face down
in the stacker.
[Face Up], [Face Down]
Output Tray Relay
The output tray switches automatically when the
tray is full.
You must set [Sort] to [Uncollated] in the [Basic]
tab.
• This setting is not available when using the wide
stacking tray.
• [Output Tray Relay] and [Add Cover] cannot be
used at the same time. (p. 3-23 "Add Cover")
8-16

Copy Mode Settings

Output Tray
Select the output tray for printouts.
• The tray details displayed on the [Output Tray]
screen vary depending on the optional
equipment that is connected.
[Auto]
The appropriate tray is selected automatically.
[A Face Down Tray], [B Auto-Control Stacking Tray]
or [B Wide Stacking Tray]
Select the output tray.
1
Touch [Output Tray].
2
Select the output tray.
3
Touch [OK].
Face Up/Down
Specify whether to stack the pages face up or face
down in the stacker.
[Face Up], [Face Down]
ComColor GD Series User's Guide