Riso 9630R User Manual page 180

Chapter 8 Optional Equipment
3
Adjust the paper feed guides so that
they are suitable for the paper size.
Slide the guides while pinching the paper feed guide
levers to match the guides against the edges of the
paper, and release the paper feed guide levers to fix
the guides in position.
4
Adjust the paper feed pressure
adjustment lever.
For general use, set to "NORMAL". For thick paper
or other paper for special purposes, set to "CARD".
5
On the operation panel, check the
tray settings.
Configure the paper size and type with [Paper Tray].
When changing the paper loaded in a tray, be sure
to change the settings in [Paper Tray].
8-10
Regarding the Standard Tray
Padding Covers
Depending on the size of the paper being used, the
standard tray padding covers may or may not be
necessary.
■ Cases When the Standard Tray
Padding Covers Are Necessary
Properly attach and use the standard tray padding covers
when the paper size is B5-LEF, A4-LEF, B4, A3, or a
custom size having a width of 257 mm (10 1/8") or more.
■ Cases When the Standard Tray
Padding Covers Are Not Necessary
When the size of the paper is less than A4 vertically or
more than A3, or when using envelopes of the C5 or DL-
LEF size, remove the standard tray padding cover. The
paper feed guide cannot be moved while the cover is in
place.
ComColor GD Series User's Guide