Loading The Paper - Riso 9630R User Manual

Loading the Paper

1
Spread the paper feed guides.
Pinch the paper feed guide levers (both sides) to
unlock and slide the guides.
2
Load the paper.
Load the paper with the printing side face up.
High Capacity Feeder
• When a large amount of paper is loaded at
once, it is difficult to properly adjust the guides
and may prevent the paper from being loaded
correctly. (The paper may bend, warp, or be
misaligned.) Divide the paper into several bulks
when loading the paper. When setting a large
amount of paper at once, see "When Setting a
Large Amount of Paper at Once" (p. 8-11).
• Be sure to load envelopes with their flaps open
and their bottom side entering the machine first.
The adjustment of the angle of inclination of the
envelope guide is configured using the
envelope guide angle adjustment lever.
Note that it is also necessary to adjust the paper
feed pressure depending on the paper quality of
the envelopes being used. Configure the
pressure with the envelope guide paper
pressure adjustment lever. Slide the lever while
lifting it up. See the sticker near the lever to set
a pressure that is appropriate for the envelopes
being used.
Envelope guide Envelope guide
paper feed pressure angle adjustment
adjustment lever
Envelopes of
Envelopes of thin
thick paper
paper or paper
Envelopes of
thin paper
Thick paper or long
envelopes
Paper other
than envelopes
ComColor GD Series User's Guide
Keep this
surface
level
lever
8
8-9