Cutting The Top Margin Of The Original And Printing [Top Margin] - Riso 590 User Manual

Cutting the Top Margin of the Original and
Printing
[Top Margin]
You can cut the top portion of the margin to between 0 to 99 mm (0.0" to 3.9") and make a master.
This feature enables you to skip the registration marks
of these marks.
A margin on the paper periphery is required even if you use "Top Margin" function.
p.18
* About the Registration Mark
In the field of commercial printing, it is normal to print on paper that is larger than the finished size and then cut down
to the finished size afterwards. The symbol that indicates the position to cut in this event is known as the registration
mark.
Important!:
• When setting both the "Size" and "Top Margin", cut the Top Margin within the specified range and then enlarge/
reduce the original.
• Do not use "Auto Reproduction Size".
• This function cannot be used with "Multi-Up Print" and "2 Up".
• An ADF unit (option) cannot be used with "Top Margin".
1
Place an original.
Place the original face down on the Glass Platen.
Align center on the top edge, and close Platen
Cover.
2
Touch [Functions] on the Master
Making Basic Screen.
Ready to Make Master
Basic Selections
Image Contrast
Auto
Line
Dot
Reserva-
Process tion
Black
*
Functions Admin.
Size Paper
A4
Multi-Up
Editor
Print
Idl e I nf o

Cutting the Top Margin of the Original and Printing [Top Margin]

on the original and print on the finish-sized paper without any
3
Touch [Top Margin].
Ready to Make Master
Basic Selections
Meter Display
Program
Job Memory
Dot Process
4
Touch [ON].
Ready to Make Master
Top Margin
Basic Selections
The top margin of
originals can be cut
by a specified range
OFF
O N
(Numeric keypad is available for input)
Functions for Master-Making
Functions Admin.
Multi-Up Print
2 Up
Book Shadow
Top Margin
P. 1/4
Cancel OK
Functions Admin.
P. 2 / 4
79