Copy Mode Function Buttons; Favorites; Additional Copy - Riso 9630R User Manual

Copy Mode Function Buttons

Function buttons

Favorites

Settings can be called whenever necessary. The
recommended settings are pre-registered as
favorites.
Registering frequently used settings can be useful.
For more information, see "Adding to Favorites"
(p. 1-33).
1
Touch [Favorites].
The [Favorites] screen is displayed.
2
Select one of the favorites.
Set values are shown in a list on the screen.
The following settings can be configured from the
sub menu:
• Rename
• Delete
3
Touch [OK].
• You cannot rename or delete favorites that are
registered as factory settings.

Additional Copy

This function prints out a copy of the original that
was copied last. The original does not need to be
scanned again.
• Additional Copy cannot be made in the following
cases:
- When the administrator has not permitted the
use of the additional copy function
- When auto reset has been executed after
copying the original
- When the user is logged out
1
Touch [Additional Copy] after the
copy job is finished.
The [Additional Copy] screen is displayed.
2
Use the numeric keys to specify the
number of copies.
3
Touch [OK].
Printing of additional copies starts.
ComColor GD Series User's Guide
1
1-31