High Capacity Feeder - Riso 9630R User Manual

High Capacity Feeder

By connecting the optional high capacity feeder, it is possible to load the unit with approximately 4,000 sheets
of printing paper (when using plain paper, recycled paper).
A Paper Feed Pressure Adjustment Lever
Use this lever to adjust the paper feed pressure for either
[Standard] or [Card] to suit the paper type loaded in the
high capacity feeder.
B Standard Tray Descent Button
Use this button to move the high capacity feeder up or
down when replacing or adding the paper to it.
C Paper Feed Guide Levers
Pinch these levers to slide the paper feed guide. Release
the levers to fix the paper feed guide in position. Levers
are located on both sides of the standard tray paper
guide, in two places.
D Front Cover
Open this cover when there is a paper jam.
E Standard Tray Paper Guide
This guide prevents paper in the high capacity feeder
from becoming misaligned.
F Envelope Guide
Use this guide when printing on an envelope. Depending
on the type of envelope being used, it is necessary to
adjust the angle of inclination.
8-8
G Envelope Guide Angle Adjustment Lever
Use this leve to adjust the angle of inclination of the
envelope guide. The angle of the envelope guide can be
adjusted to four levels.
H Envelope Guide Paper Feed Pressure
Adjustment Lever
Use this lever to adjust the paper feed pressure to suit
the paper quality of the envelope being used.
I Standard Tray Padding Covers
Remove the covers when you load sheets smaller than
A4 (Letter) or larger than A3 (Ledger), or C5/DL-LEF
envelopes.
J High Capacity Feeder Socket
Connect the high capacity feeder power cord. The socket
is located on the right side in the rear of the standard
tray.
• The standard tray cannot be used when the
high capacity feeder is connected.
K Transfer Cover
If a paper jam occurs, open this cover and remove the
jammed sheet.
ComColor GD Series User's Guide