List Of Settings In [Usb] - [Load] - Riso 9630R User Manual

Chapter 5 USB

List of Settings in [USB] - [Load]

Select the folder on the [USB] - [Load] screen, and touch [Open] to display a list of the documents inside the
folder. When you select a document and touch [Change Setting] in the sub menu, the setting screen is
displayed.
The settings that can be configured on this screen are listed below.
Setting item
Paper Selection
Print Density
Image Position
Slow Printing
Check Setting
• When the PS kit is installed, you can load PDF files that are saved on a USB flash drive. In doing so, you can
change the print settings for PDF files. For more information, see "Printable Files in the USB Flash Drive"
(p. 8-53) in "Optional Equipment".
5-6
Change the paper tray, paper type, and feed control settings according to
the copying paper.
Specify the print density.
Adjust the print position.
Decrease the printing speed. This also reduces the amount of noise
produced by the machine when printing jobs.
Check the current settings.
Use this item to:
Reference
Page
p. 1-8
p. 1-12
p. 1-22
p. 1-29
p. 5-9
ComColor GD Series User's Guide