List Of Settings - Riso 9630R User Manual

List of Settings

The items described below can be set when the
face down finisher is connected.
Printer Driver
Setting item Use this item to:
[Finishing] tab
Staple Select the stapling
position.
Offset Output Stack sets of printed
documents slightly
apart from one another
when printing multiple
copies.
[Advanced] Tab
Program Specify the number of
copies by group (such
as corporate division or
class).
Offset Stack sets of printed
Output documents slightly
(Program) apart from one another
to create separation.
• When [Staple] is grayed out in the [Finishing]
tab, make sure that [Printer Configuration] on
the [Environment] tab has been configured
correctly. (p. 3-32 "Printer Configuration")
Copy Mode
Setting item
Program
Offset
Output
See
([Program])
Separation
p. 8-4
p. 8-6
Offset Output
([Separation])
Staple
p. 3-28
p. 8-6
Face Down Finisher
Use this item to:
Specify the number of p. 1-24
copies by group (such
as corporate division or
class).
Stack sets of printed p. 8-6
documents slightly
apart from one another
to create separation.
Specify where to insert p. 1-27
slip sheets between
printouts.
Stack sets of printed p. 8-6
documents slightly
apart from one another
to create separation.
Configure the staple p. 8-7
settings.
ComColor GD Series User's Guide
See
8
8-3