Riso 9630R User Manual page 65

■ About the Separation Settings
[Sort]
[Uncollated]: Copies are made by page.
[Collated]: Copies are made in sets.
[Slip Sheet]
[OFF]: Slip sheets are not inserted.
[Between Sets]: Slip sheets are inserted between each
set.
[Between Groups]: Slip sheets are inserted between
each group.
[Paper]
Specify the paper tray in which slip sheets are loaded.
[Number Printing]
[ON]: Numbers will be printed.
The group number and set number are printed when [Slip
Sheet] is set to [Between Sets], and only the group
number is printed when [Slip Sheet] is set to [Between
Groups].
Saving a Program
You can register up to 12 programs and call them
whenever necessary.
1
Touch [Program].
The [Program] screen is displayed.
2
Touch [No Entry], and then touch
[Edit].
The program edit screen is displayed.
3
Enter the number of copies and sets
using the numeric keys.
4
Touch [Separation].
The [Separation] screen is displayed.
5
Configure the sort and slip sheet
and touch [OK].
Set the [Paper] and [Number Printing] options as
well if necessary.
• If you are using the optional face down
finisher, high capacity stacker, or
multifunction finisher, you can configure
[Offset Output]. For more information, see
the following:
- When using the face down finisher
(p. 8-6 "Offset Output ([Program])")
- When using the high capacity stacker
(p. 8-24 "Offset Output ([Program])")
- When using the multifunction finisher
(p. 8-36 "Offset Output ([Program])")
ComColor GD Series User's Guide
Copy Settings
1
1-25