Maintenance Mode Settings - Riso 9630R User Manual

Output Tray Relay
When using the auto-control stacking tray, the
output tray switches automatically when the tray
that is being used becomes full.
1
Touch [Output Tray Relay].
2
Touch [ON].
3
Touch [OK].
• This setting is not available when using the wide
stacking tray.
• When [Output Tray Relay] is configured, [Sort]
is set to [Uncollated]. (p. 1-11 "Sort")
• [Output Tray Relay], [Booklet], and [Add Cover]
cannot be used at the same time. (p. 1-16
"Booklet", p. 1-27 "Add Cover")
Stacking Tray (Auto-control Stacking Tray / Wide Stacking Tray)
Maintenance Mode
Settings
Paper Guide Control
Adjust the position of the paper guide when using
the auto-control stacking tray. For more
information, see "Paper Guide Control" (p. 9-3) in
the "Appendix".
ComColor GD Series User's Guide
8
8-17