Load The Paper; Standard Tray - Riso 9630R User Manual

• The machine detects the size of the paper
based on the stopper position. Be sure to
move the guides against the edge of the
paper.
• To set A3 paper or B4 paper, install the A3/
B4 paper guide properly for each type. Pinch
both sides of the A3/B4 paper guide, slide it
out and then slide it into the appropriate hole
for the desired paper size.
When using A3 paper
6
Push the tray back into the machine.
7
On the operation panel, check the
tray settings.
When you have switched to a different type or size of
paper, update the feed tray settings. (p. 1-8 "Paper
Selection")
Loading the Paper in the

Standard Tray

1
Open the standard tray until it stops.
32
B4 A3
2
Spread the guides.
Raise the paper feed guide levers (both sides) to
unlock and slide the guides.
3

Load the paper.

Load the paper with the printing side face up.
• When printing on envelopes, it is
recommended that you connect the
optional stacking tray and envelope feed
kit.
• Be sure to load envelopes with their flaps
open and their bottom side entering the
machine first.
OK
Wrong
• The [Rotation] feature is useful for printing
on envelopes from a computer.
ComColor GD Series User's Guide