During Printing - Riso 9630R User Manual

Chapter 3 Printing
3
Change Settings.
You can change the following settings:
• Slow Printing (p. 1-29 "Slow Printing")
• Print Density (p. 1-12 "Print Density")
• Paper Selection (p. 1-8 "Paper Selection")
• Image Position (p. 1-22 "Image Position")
• If you touch [Proof], only one copy of the
page that was being processed when the
[Stop] key is pressed is printed.
4
Touch [Close].
5
Touch [Continue].
The print job is resumed with the changed settings
applied.
3-4
Performing Maintenance

During Printing

1
Press the [Stop] key.
The [Suspending] screen is displayed.
2
Touch [Maintenance].
The [Maintenance] screen is displayed.
3
Change Settings.
You can change the following settings:
• Print Head Cleaning
• Front Cover Release
• Online/Offline
• Paper Guide Control
• Touch [Online/Offline] to display the
[Online/Offline] screen. You can
monopolize the printer by setting [Online/
Offline] to [OFF].
• For more information on [Print Head
Cleaning] and [Front Cover Release], see
"Maintenance" (p. 9-2) in the "Appendix".
• If you touch [Proof], only one copy of the
page that was being processed when the
[Stop] key is pressed is printed.
• If you are using the optional auto-control
stacking tray or high capacity stacker, you
can adjust the position of the stacking tray
with [Paper Guide Control]. For more
information, see "Maintenance" (p. 9-2) in
the "Appendix".
4
Touch [Close].
5
Touch [Continue].
The print job is resumed with the adjustment applied.
ComColor GD Series User's Guide