Duplex / Simplex; Sort - Riso 9630R User Manual

Duplex / Simplex

Specify the combination of the sides of the original
to be scanned and the sides of the paper to be
printed on.
[Simplex Simplex]
One side of the original is scanned and printed on a
single side of paper.
[Simplex Duplex]
One side of the original is scanned. The scanned data is
then printed on both sides of paper.
[Duplex Duplex]
Both sides of the original are scanned and copied to
separate sides of paper.
[Duplex Simplex]
The scanned data of the two sides are copied onto a
single side of two separate sheets of paper.
[Paging Direction]
Specify whether pages are opened right/left or top/
bottom.
[Original Orientation] (p. 1-10 "Original Orientation")
How to set the combination of scanning sides and
printing sides is explained below using an example
of copying data scanned from a single side of the
original to both sides of paper.
1
Touch [Duplex/Simplex].
The [Duplex/Simplex] screen is displayed.
• If the [Confirm] screen appears, set the original
orientation to [Top Side Up] or [Top Side Left].
2
Touch [Simplex
3
Specify [Paging Direction].
4
Touch [OK].
Duplex].

Sort

Specify the paper output method when making
multiple copies.
[Collated]
Select this option to make copies in sets.
[Uncollated]
Select this option to copy by page.
1
Touch [Sort].
The [Sort] screen is displayed.
2
Select the sorting type.
3
Touch [OK].
ComColor GD Series User's Guide
Copy Settings
1
1-11