Login - Riso 9630R User Manual

Login

Lock icons in the upper right corner of mode
buttons indicate that you must log in to access
those modes.
• When logging in for the first time, you need the
temporary password that is issued by the
administrator.
Logging In
• When using an IC card reader, you can log in by
holding the IC card over the card reader.
1
Press the [Login/Logout] key.
2
On the [Login] screen, select your
name.
To find your name, scroll through the screen or
press the index button to display user names.
The [Password] screen appears after you select
your name.
30
Lock icon
3
Input your password and touch
[Login].
Follow the displayed instructions for operation.
• When logging in for the first time, change
the temporary password to your own
password.
When you are successfully logged in, the screen you
were in when you pressed the [Login/Logout] key
appears again. Your user name is displayed at the
bottom left of the screen.
• After finishing operations, be sure to press the
[Login/Logout] key to log out.
• Contact your administrator if you cannot find
your name, or if you have forgotten the
password.
• If your user name does not appear at the
bottom left of the [Home1] screen, touch the
mode button and perform the operations
described in steps 2 and 3 under "Logging In".
When you are successfully logged in, the
screen for the selected mode appears.
Changing the Login Password
1
Touch [System Info] on the [Home1]
screen after logging in.
2
Touch [User Info] - [Change
Password].
3
Enter the new password and touch
[Next].
4
On the [Change Password (confirm)]
screen, enter the new password
again and touch [OK].
ComColor GD Series User's Guide