Riso 9630R User Manual page 202

Chapter 8 Optional Equipment
• When [Mixed Size Original] is configured, it is
possible to select [Z-fold] only for [Fold]. In this
case, the combinations of original sizes that can
be mixed are "A4-LEF and A3", "B5-LEF and
B4", and "Letter-LEF and Ledger". (p. 3-11
"Mixed Size Original")
• When used together with [Mixed Size Original],
for [Orientation], select the orientation of the
original that is larger. (When the A4 original is
vertical and the A3 original is horizontal, select
[Horizontal]) (p. 3-10 "Original Size", p. 3-11
"Mixed Size Original")
• For [Paper Size], specify the size of the paper
subject to the Z-fold. (p. 3-11 "Paper Size")
• When using this function with duplex printing,
duplex printing is only applied when the size of
the front and back of the document is the same.
(If the size is not the same, the back of the page
is left blank.) (p. 3-9 "Duplex / Simplex")
• When used together with [Mixed Size Original],
you can configure the staple, punch, and offset
output functions. (p. 3-10 "Original Size",
p. 8-34 "Offset Output", p. 8-28 "Staple", p. 8-30
"Punch")
• When used together with [Add Cover], the
added cover will be the size after the Z-fold.
(p. 3-23 "Add Cover")
8-32
Booklet Binding
Perform duplex printing of a series of multiple
pages and create a booklet by bi-folding the paper.
The booklet can also be bound in the center with a
staple.
• When [Booklet Binding] is configured, [Sort] is
set to [Collated]. (p. 3-10 "Sort")
• [Booklet Binding] cannot be used together with
[Mixed Size Original], [Combine], [Image
Repeat], [Binding Edge], [Slip Sheet],
[Program], [Blank Page Detection], [Multi-part
Paper Printing], [Staple], [Punch], [Fold], [Offset
Output], and [Output Tray Relay]. (p. 3-11
"Mixed Size Original", p. 3-15 "Combine",
p. 3-16 "Image Repeat", p. 3-20 "Binding Edge",
p. 3-22 "Slip Sheet", p. 3-28 "Program", p. 3-30
"Blank Page Detection", p. 3-30 "Multi-part
Paper Printing", p. 8-28 "Staple", p. 8-30
"Punch", p. 8-30 "Fold", p. 8-34 "Offset Output",
p. 8-35 "Output Tray Relay")
Types of paper that can be used to create
booklets
• A3, B4, A4, Ledger, Legal, Letter, Foolscap,
Custom size
210 mm -
330 mm
(8 1/4" -
13")
280 mm - 457 mm
(11" - 18")
[OFF]
Booklet binding will not be configured.
[Fold]
The printing paper will be folded in two.
[Fold + Staple]
The printing paper is folded in half and bound in the
center with a staple.
Select the booklet binding method and click [Details] to
display the [Booklet Binding] dialog box. Configure
separating books, center binding, and separate cover
printing.
ComColor GD Series User's Guide
Paper feed
and output
direction