Copy Mode Settings - Riso 9630R User Manual

Chapter 8 Optional Equipment
Output Tray Relay
The output tray switches automatically when the
tray is full.
You must set [Sort] to [Uncollated] in the [Basic]
tab.
Offset Output (Program)
In addition to the "Program" (p. 3-28) function for
printouts, you can stack sets of printed documents
slightly apart from one another to create
separation.
[OFF]
Offset output is not performed.
[Between Sets]
Each set of printed documents is stacked slightly apart
from one another.
[Between Groups]
Groups of printed documents are stacked slightly apart
from one another.

Copy Mode Settings

Offset Output ([Program])
In addition to the "Program" (p. 1-24) function for
copying, you can stack sets of printed documents
slightly apart from one another to create
separation.
[OFF]
Offset output is not performed.
[Between Sets]
Each set of printed documents is stacked slightly apart
from one another.
[Between Groups]
Groups of printed documents are stacked slightly apart
from one another.
8-24
Offset Output ([Separation])
In addition to the "Separation" (p. 1-27) function for
copying, you can stack sets of printed documents
slightly apart from one another to create
separation.
• You cannot use [Offset Output] and [Mixed Size
Original] at the same time. (p. 1-13 "Mixed Size
Original")
[OFF]
Offset output is not performed.
[Between Sorts]
Each sorted set is stacked slightly apart from one
another.
[After a Job]
Each print job is stacked slightly apart from one another.
Paper sizes that can be offset
• A3, B4, A4, A4-LEF, B5, B5-LEF, Ledger, Legal,
Letter, Letter-LEF, Foolscap, Specified Size
(length of paper between 182 mm (7 3/16") to
432 mm (17"))
1
Touch [Separation].
2
Select the offset output setting.
3
Touch [OK].
ComColor GD Series User's Guide