List Of Settings In [Storage] - [Save] - Riso 9630R User Manual

List of Settings in [Storage] - [Save]

Select the folder on the [Storage] - [Save] screen, and touch [Save Document] to display the screen listing the
setting items. The settings that can be configured on this screen are listed below.
Setting item
Document Name View the document name when saving the data in a folder.
Color Mode Select color or monochrome printing.
Reproduction Size Reduce or enlarge the copied image.
Paper Selection Change the paper tray, paper type, and feed control settings according to
the copying paper.
Scanning Size Specify the scanning size for originals.
Original Orientation Specify the orientation of the original.
Duplex / Simplex Specify the sides of the original to be scanned and the sides of the paper to
be printed on.
Sort Specify the printing method for making multiple copies of the original.
Scanning Level Adjust the scanning level.
Print Density Specify the print density.
ADF Scan & Pause Scan the original as one job even when having to load the original in multiple
sets due to the large number of pages in the original.
Mixed Size Original Scan the original containing pages of the different original sizes.
Book Shadow Remove shadows that appear in the center of images when an open book is
Erasure scanned.
Page Split Scan double-spread pages and split them into two parts (right and left).
Combine Impose continuous pages onto one sheet.
Image Repeat Impose multiple copies of the same original onto one sheet.
Booklet Specify the imposition setting when creating a booklet. You can also bi-fold
the pages and bind them in the center when the optional multifunction
finisher is connected.
PIN code Configure whether to set a PIN code for the job.
If a PIN code is configured, you will need to enter this PIN code when
printing or deleting a document.
Stamp Stamp the page number, date, or text in the header or footer.
Page Border Add a border line in the margins of the paper.
Image Quality Specify the resolution for scanning originals.
Original Type Select the original type so that the appropriate image processing is
performed before printing the scanned data.
Gamma Correction Adjust the color balance (CMYK) of the scanned data.
Image Control Specify the image processing of the original.
Base Color Level Make the background color (base color) lighter so that the text is easier to
read.
Image Position Adjust the print position.
Overview of Storage Operations
Use this item to:
Reference
Page
p. 4-9
p. 1-7
p. 1-7
p. 1-8
p. 1-10
p. 1-10
p. 1-11
p. 1-11
p. 1-12
p. 1-12
p. 1-12
p. 1-13
p. 1-13
p. 1-14
p. 1-15
p. 1-16
p. 1-16
p. 2-9
p. 1-17
p. 1-19
p. 1-20
p. 1-20
p. 1-21
p. 1-21
p. 1-22
p. 1-22
ComColor GD Series User's Guide
4
4-5