Printer Driver Settings - Riso 9630R User Manual

Chapter 8 Optional Equipment

Printer Driver Settings

Staple
Select the stapling position.
• When [Staple] is configured, make sure to
configure [Binding Edge].
• When [Staple] is configured, [Sort] is set to
[Collated]. (p. 3-10 "Sort")
• When [Mixed Size Original] is configured,
[Staple] is [OFF]. (p. 3-11 "Mixed Size Original")
• When [Booklet] is configured, [Staple] is [OFF].
(p. 3-16 "Booklet")
• The orientation of the paper varies depending
on the binding edge. See "Staple Function and
Loading Orientation of the Paper" (p. 8-5).
If you select [Left] or [Right] for [Binding Edge], select
from the following options:
[OFF], [1 Staple], [2 Staples]
If you select [Top] for [Binding Edge], select from the
following options:
[OFF], [Left 1 Staple], [Right 1 Staple], [2 Staples]
Left 1 Staple
1 Staple
2 Staples
8-4
Right 1 Staple
2 Staples
1 Staple
2 Staples
Binding edge
Types of paper that can be stapled
• Paper size: A3, B4, A4, A4-LEF
Ledger, Legal, Letter, Letter-LEF, Foolscap
182 mm -
297 mm
(7 3/16" -
11 11/16")
257 mm - 432 mm
(10 1/8" - 17")
2
• Paper weight: 52 g/m
(14-lb bond - 56-lb bond)
Number of sheets that can be stapled
• Standard size paper
A4, A4-LEF, B5, B5-LEF (Letter, Letter-LEF):
2
2 to 50 sheets
Sizes other than the above (A3, B4 (Ledger,
Legal, Foolscap)): 2 to 25 sheets
1 Long Edge Feed
2 When using plain paper and recycled paper
2
(85 g/m (23- lb bond))
• Stapling cannot be performed when using
irregular-sized paper.
• When the printing job exceeds the maximum
number of sheets that can be stapled, a
confirmation screen is displayed so that you can
select whether to stop printing or continue
printing without stapling.
ComColor GD Series User's Guide
1
, B5, B5-LEF,
Paper feed
and output
direction
2
- 210 g/m
2