Riso 9630R User Manual page 109

■ Date
To print the date stamp, select [ON] on the [Date] tab
screen.
[Top Left], [Top Center], [Top Right], [Bottom Left],
[Bottom Center], [Bottom Right]
Select the date stamping position.
[Transparency]
Select the [Transparency] check box to have the date
stamped on top when the stamp area and images
overlap.
Remove the check mark to create a white space by
removing images in the stamp area, and then stamp the
date in that white space.
[Apply Page]
Specify the first page on which to print the date stamp.
[All Pages]: The date will be printed on all pages.
[First Page]: The date will be printed on the first page
only.
[Stamp Date]
Configure the date to use for the date stamp.
[Today]: The date set on the computer is printed.
[Specify Date]: The date specified in the text box is
printed.
[Font]
Select a font and style.
[Size]
Specify the size of the text for the date stamp.
■ Text
To print a text stamp, select [ON] on the [Text] tab
screen.
[Top Left], [Top Center], [Top Right], [Bottom Left],
[Bottom Center], [Bottom Right]
Select the text stamping position.
[Transparency]
Select the [Transparency] check box to have the date
stamped on top when the stamp area and images
overlap.
Remove the check mark to create a white space by
removing images in the stamp area, and then stamp the
date in that white space.
[Apply Page]
Specify the pages on which to print the text stamp.
[All Pages]: The text will be printed on all pages.
[First Page]: The text will be printed on the first page only.
[Text]
The text specified in the text box is printed.
[Font]
Select a font and style.
[Size]
Specify the size of the text for the text stamp.
Image Position
Adjust the printing position of images.
• You can move the image position up to 20 mm
(13/16") in all directions (up, down, left, right).
• When performing duplex printing, the front and
back sides can be adjusted separately.
Select the [Image Position] check box and click [Details]
to display the [Image Position] dialog box.
Enter a value in the data entry field of the direction that
you want to adjust.
[Front Side], [Back Side]
Enter a value for [Horizontal] or [Vertical].
[Reset]
All values are reset to zero.
ComColor GD Series User's Guide
Printer Driver Settings
3-19
3