High Capacity Stacker - Riso 9630R User Manual

High Capacity Stacker

By connecting the high capacity stacker, it is possible to output approximately 4,000 sheets of printing paper
(when using plain paper, recycled paper).
The printouts that have been output can be removed at once with the dedicated carriage.
A Stacking Tray Descent Button
Press this button to remove printouts from the stacking
tray. If you press the stacking tray descent button, the
stacking tray lowers to the bottom (the position of the
carriage). The stacking tray stops when you press the
stacking tray descent button during lowering. If you press
the button again, the stacking tray continues lowering.
The stacking tray does not operate during printing even if
you press the stacking tray descent button. Press with
the right and left covers closed.
B Right Cover
Open this cover when removing printouts, setting the
carriage in position, or when removing paper jams.
C Paper Guide
Use this guide to prevent printouts that have been output
from becoming misaligned.
D Corrugators
Set the corrugators to feed paper smoothly according to
the paper type and align printouts to stack neatly.
8-18
E Carriage
Set this dedicated carriage inside the high capacity
stacker. Connect the stacking tray to the carriage to
transport high-volume printouts.
F Stacking Tray
Printouts are output to this tray.
G Left Cover
If a paper jam occurs while paper is being transported,
open this cover and remove the jammed paper.
H High Capacity Stacker Socket
Connect the high capacity stacker power cord. The
socket is located toward the bottom on the rear of the left
cover.
• Do not open the cover during printing. You
cannot print with the cover open.
• Be sure to use the dedicated carriage with the
high capacity stacker.
ComColor GD Series User's Guide