Advanced] Tab - Riso 9630R User Manual

■ Max Drops
You can manually set the maximum number of drops for
the ink.
• When [Max Drops] is set to [Auto], the number
of drops is automatically configured based on
the paper type. Normally, use [Auto].

[Advanced] Tab

For more information on each setting item, see
"[Advanced] Tab" (p. 3-28) in "Printing".
• The [Program] and [Blank Page Detection]
settings are not available with the PostScript
printer driver.
• [Color Profile] is not displayed on the [Version]
screen of the PostScript printer driver.
Form Overlay
You can select a form that has been registered to
the machine, and overlay it on the output data for
printing.
Select the [Form Overlay] check box and click [Details] to
display the [Form Overlay] dialog box. Configure the
settings for overlaying the form.
Output data Form
[Print Pattern]
Specify whether to print the form on the same side as the
output data.
[Print Face]
When [Alternating Overlay (Long Edge)]/[Alternating
Overlay (Short Edge)] or [Each Page + Alternating
Overlay (Long Edge)]/[Each Page + Alternating Overlay
(Short Edge)] is selected, specify whether to print the
form on the front or back.
[Front/Back Separately]
When performing duplex printing, you can specify
separate forms for the front and back.
• This setting is available if [Each Page Overlay]
[Form 1]
Printed
Select the form to print on the front or both sides of the
result
output data.
[Form 2]
Select the form to print on the back side of the output
data.
[Preferred Layer]
When [Each Page Overlay], [Each Page + Alternating
Overlay (Long Edge)], or [Each Page + Alternating
Overlay (Short Edge)] is selected, specify whether to
assign priority to the form or the output data.
or [Each Page + Alternating Overlay (Long
Edge)]/[Each Page + Alternating Overlay (Short
Edge)] is selected in [Print Pattern].
ComColor GD Series User's Guide
PS Kit
8
8-49