Adding The Paper - Riso 9630R User Manual

When Setting a Large Amount
of Paper at Once
1
Spread the paper feed guides and
load approximately 500 sheets onto
the standard tray.
2
Adjust the paper feed guides so that
they are suitable for the paper size.
Move the guides against the edges of the paper, and
release the lever to lock.
3
Load the rest of the paper.
Procedures after all of the paper has been loaded
are the same as when loading the paper for normal
operation. Perform step 4 and 5 described in
"Loading the Paper" (p. 8-9).

Adding the Paper

Use the standard tray descent button when adding
the paper. The position to which the standard tray
is lowered will differ depending on how the
standard tray descent button is operated. Note that
the standard tray is automatically lowered when all
paper is removed.
1
Press the standard tray descent
button to lower the standard tray.
Hold down the standard tray descent button.
The standard tray will keep lowering for as long as
the button is being pressed. Hold the button down
until the tray reaches the desired position.
Press and quickly release the standard tray
descent button.
The standard tray will be lowered to a certain
position.
• The position to which the standard tray is
lowered when the standard tray descent button
is pressed or when paper runs out is set by the
administrator. Contact your administrator for
details.
• When the standard tray is lowered to the
lowermost position, it is possible to load a large
amount of paper at once but this will require that
you squat when loading the paper. To load the
paper while standing or when it is rare that you
need to load a large amount of paper at once,
avoid lowering the standard tray to the
lowermost position.
• The position to which the standard tray is
lowered can be conveniently configured to suit
scenes of use. To change the position to which
the standard tray is lowered, contact your
administrator.
ComColor GD Series User's Guide
High Capacity Feeder
8-11
8