[Environment] Tab - Riso 9630R User Manual

[Environment] Tab

When using the printer driver for the first time or
adding optional equipment to the machine, you
must configure the environment settings on the
[Environment] tab under printer properties.
To display the [Environment] tab, go to [Devices and
Printers] from the [Start] menu, right-click the GD series
printer, and open the [Printer Properties].
• Clicking [Restore Default] restores all settings
on the tab to their default values.
Via Shared Printer
Select this option to share the printer driver of the
server computer to use this machine.
Place a check in [Via Shared Printer] and under [IP
Address of the Printer], enter the IP address of this
machine configured to be shared with the print server by
using up to 39 characters. You can check the IP address
of the machine on the [System Info] - [Machine Info]
screen on the operation panel.
SNMP Community Name
Specify the community name for SNMP
communication.
Place a check in [SNMP Community Name] and use the
text box to enter 1 to 32 characters as the community
name for SNMP communication.
• If a check is not placed in [SNMP Community
Name], the community name for SNMP
communication will be set to "public".
• Alphanumeric characters (upper case/lower
case) and the following symbols can be entered
in the text box for [SNMP Community Name]:
, . / : ; @ [ ¥ ] ^ _
• It will not be possible to obtain information from
the machine if the SNMP community names are
different between the machine and the printer
driver. If you have made changes to the SNMP
community name with the machine, you must
make sure to also apply the change to the
printer driver.
Wake On LAN
You can send a Wake On LAN signal from the
computer to start the printer.
Select the check box for [Wake on LAN] and enter the
machine's MAC address in the [MAC address of the
Printer] field.
When a check is placed in [Connect to Another Network],
the Wake On LAN signal can be sent even when the
machine is located in a different network segment than
the computer.
• Select [Get Printer Info] and click [Apply] to
automatically obtain the MAC address of the
printer and display it in [MAC Address of the
Printer]. Manually re-enter the address if the
displayed MAC address is not the MAC address
of the desired printer.
• Normally, leave the check box for [Connect to
Another Network] unselected.
• Despite configuring [Wake on LAN], depending
on the network settings it may not be possible to
start the printer. Contact your network
administrator for details.
ComColor GD Series User's Guide
Printer Driver Settings
3-31
3