List Of Settings - Riso 9630R User Manual

List of Settings

The following is a list of settings available in Copy mode.
• There are items that are displayed only when you are using the optional face down finisher, stacking tray, or
multifunction finisher. In such case, the display and functions may differ depending on the optional equipment
that is connected.
Setting item
Color Mode Select color or monochrome printing.
Reproduction Size Reduce or enlarge the copied image.
Paper Selection Change the paper tray, paper type, and feed control settings according to
the copying paper.
Scanning Size Specify the scanning size for originals.
Original Orientation Specify the orientation of the original.
Duplex / Simplex Specify the sides of the original to be scanned and the sides of the paper to
be printed on.
Sort Specify the printing method for making multiple copies of the original.
Scanning Level Adjust the scanning level of originals.
Print Density Specify the print density.
ADF Scan & Pause Copy the original as one job even when having to load the original in
multiple sets due to the large number of pages in the original.
Mixed Size Original Copy the original containing pages of the different orginal sizes.
Book Shadow Remove shadows that appear in the center of images when an open book
Erasure is scanned.
Page Split Scan double-spread pages and split them into two parts (right and left).
Combine Impose continuous pages onto one sheet.
Image Repeat Impose multiple copies of the same original onto one sheet.
Booklet Specify the imposition setting when creating a booklet. You can also bi-fold
the pages and bind them in the center when the optional multifunction
finisher is connected.
Stamp Stamp the page number, date, or text in the header or footer.
Page Border Add a border line in the margins of the paper.
Image Quality Specify the resolution for scanning originals.
Original Type Select the original type so that the appropriate image processing is
performed before printing the scanned data.
Gamma Correction Adjust the color balance (CMYK) of the scanned data.
Image Control Specify the image processing of the original.
Base Color Level Make the background color (base color) lighter so that the text is easier to
read.
Image Position Adjust the print position.
Overlay Make copies upon layering an image that has been saved on the storage.
Use this item to:
Overview of Copy Operations
See
p. 1-7
p. 1-7
p. 1-8
p. 1-10
p. 1-10
p. 1-11
p. 1-11
p. 1-12
p. 1-12
p. 1-12
p. 1-13
p. 1-13
p. 1-14
p. 1-15
p. 1-16
p. 1-16
p. 1-17
p. 1-19
p. 1-20
p. 1-20
p. 1-21
p. 1-21
p. 1-22
p. 1-22
p. 1-23
ComColor GD Series User's Guide
1
1-5