Riso 9630R User Manual page 224

Chapter 8 Optional Equipment
List of Settings in [USB] - [Load]
You can change the print settings for PDF files.
Select the folder on the [USB] - [Load] screen, and touch [Open] to display a list of the documents inside the
folder. When you select a document and touch [Print Setting], the setting screen is displayed. The settings
that can be configured on this screen are listed below.
Setting item
Color Mode
Reproduction Size
Paper Selection
Duplex / Simplex
Sort
Print Density
Combine
Image Repeat
Booklet
Stamp
Add Cover
Separation
Binding Margin
Staple/Punch
Fold*
Slow Printing
Output Tray
Face Up/Down
8-54
Select color or monochrome printing.
Specify enlargement or reduction of original images before printing, if
needed.
[Fit to Paper] is not available.
Change the paper tray, paper type, and feed control settings according to
the paper used for printing.
Specify the sides of the paper that are printed on.
Specify the sorting method when printing multiple copies.
Specify the print density.
Impose continuous pages onto one sheet.
Impose multiple copies of the same original onto one sheet.
Specify the imposition setting when creating a booklet. You can also bi-fold
the pages and bind them in the center when the optional multifunction
finisher is connected.
Stamp the page number, date, or text in the header or footer.
Add front and back covers to the printout.
Insert slip sheets. When the optional face down finisher, high capacity
stacker, or multifunction finisher is connected, the offset output setting is
also available.
Specify the binding margin.
Specify the staple settings.
(When using the optional face down finisher)
Specify the staple and punch settings.
(When using the optional multifunction finisher)
Specify the fold of the printing paper.
(When using the optional multifunction finisher with the folder unit)
Decrease the printing speed. This also reduces the amount of noise
produced by the machine when printing jobs.
Select the output tray for printouts.
When using the optional auto-control stacking tray / wide stacking tray
When using the optional high capacity stacker
When using the optional multifunction finisher
Specify whether to stack the pages face up or face down in the stacker.
When using the optional auto-control stacking tray / wide stacking tray
When using the optional high capacity stacker
When using the optional multifunction finisher
Use this item to: See
p. 1-7
p. 1-7
p. 1-8
p. 3-9
p. 1-11
p. 1-12
p. 1-15
p. 1-16
p. 1-16
p. 1-17
p. 1-27
p. 1-27
p. 1-28
p. 8-7
p. 8-37
p. 8-39
p. 1-29
p. 8-16
p. 8-25
p. 8-41
p. 8-16
p. 8-25
p. 8-41
ComColor GD Series User's Guide