Riso 9630R User Manual page 122

Chapter 3 Printing
Printer Configuration
Normally, you can click [Get Printer Info] to obtain
the optional equipment configuration information
from the printer automatically. The information
obtained from the machine is displayed in [Printer
Configuration]. The obtained information can also
be changed manually.
• The information displayed on the screen varies
depending on the optional equipment
connected.
■ Configuring the Printer Configuration
Automatically
Select [Get Printer Info] and click [Apply] to obtain the
optional equipment configuration information from the
printer and display it in [Printer Configuration].
• [Unit of Length], [Default Paper Type of "Any"],
and [External System Link] are not configured
automatically.
■ Configuring the Printer Configuration
Manually
You can change the optional equipment configuration
that you obtain from the printer.
Specify the following settings manually:
[Paper Feeder]
Select the type of feeder that is connected to this
machine.
[Finisher]
Select the type of finisher that is connected to this
machine.
[Face Down Finisher]
Select whether there is a face down finisher.
[Unit of Length]
Select whether to display the length in [mm] or [inch].
[Default Paper Type of "Any"]
Select the paper type to use when [Paper Type] under
the [Basic] tab on the printer driver screen is set to [Any].
[External System Link]
Set this option to [ON] to enable and [OFF] to disable
external system link.
3-32
• The machine changes the color profile
according to the paper type. (p. 3-12 "Paper
Type")
Even when the paper is not specified, in order to
print with an appropriate color profile, it is
necessary to configure the type of paper with
[Default Paper Type of "Any"]. Make your
selection based on the administrator's
recommendation.
Custom Paper Entry
Register up to 99 non-standard paper sizes.
The sizes registered here are displayed in [Original
Size] and [Paper Size].
■ Configuring the Paper Size
Automatically
You can use this option when the paper size is already
registered in the printer.
1
Click [Custom Paper Entry].
The [Custom Paper Entry] dialog box is displayed.
2
Click [Get Printer Info].
The information of the paper size registered in the
printer is displayed.
3
Click [Close].
The paper size information is saved.
ComColor GD Series User's Guide