Duplex / Simplex; Scanning Level; Original Orientation; Resolution - Riso 9630R User Manual

Chapter 2 Scanning
3
Change the settings as needed.
4
Touch [OK].
• If the scanned data is only one file, the scanned
data will not be compressed.
• If [File Format] is set to [PDF], the [ZIP] option
will become available when [Single Page] is set
to [ON].
• [User Password] that can be entered when
[PDF] is selected as the file format is necessary
to open the documents later. [Owner Password]
is necessary to set the access rights to
documents, specifically, the permission to print
and edit.
The [PIN code] (p. 2-9) for this machine is
different from the passwords mentioned above;
the PIN code serves the purpose of protecting
the scan jobs to be saved in the internal hard
disk and the print jobs sent from a computer.

Duplex / Simplex

Specify the sides of the original to be scanned.
• [Duplex / Simplex] and [Book Shadow Erasure]
cannot be used together. (p. 2-9 "Book Shadow
Erasure")
[Single-sided], [Double-sided]
[Paging Direction]
Specify whether pages are opened right/left or top/
bottom.
[Original Orientation] (p. 2-8 "Original Orientation")
1
Touch [Duplex/Simplex].
The [Duplex/Simplex] screen is displayed.
2
Touch [Original Orientation].
Select [Top Side Up] or [Top Side Left].
2-8
3
Specify the sides of the original to
scan.
If you have selected [Double-sided], specify the
paging direction.
4
Touch [OK].

Scanning Level

Adjust the scanning level.
For more information, see "Scanning Level"
(p. 1-12) in "Copying".

Original Orientation

Specify the orientation of the original.
For more information, see "Original Orientation"
(p. 1-10) in "Copying".

Resolution

Specify the resolution for scanning originals.
[200 dpi], [300 dpi], [400 dpi], [600 dpi]
1
Touch [Resolution].
The [Resolution] screen is displayed.
2
Select a resolution.
3
Touch [OK].
ComColor GD Series User's Guide